Dmx-512 Connection; Dmx Channels; Channel Function - Beamz Phantom 750 Mode D'emploi

DMX-512 CONNECTION

If you are using a standard DMX controller, you can connect the DMX output of the controller directly to the DMX input of
the first unit in a DMX chain. Always connect the output of one unit with the input of the next unit until all units are
connected. If you use a controller with 5 pin DMX connection you will need to use a 5-pin to 3-pin adapter.
DMX Signal
At the last fixture, the DMX cable has to be terminated. Solder a 120 Ohm resistor between signal (-) and
signal (+) into a 3-pin XLR connector and plug this into the DMX output of the last fixture in the chain.

DMX CHANNELS

13 Channels
Channel Function
Laser OFF
Auto Activate
1
Sound Activate
2 Pattern / Cartoon
3 Rotation
4 X-axis rolling
5 Y-axis rolling
6 X-axis moving
7 Y-axis moving
Pattern size
8
Zooming
9 Pattern size
10 Drawing
11 Display dot
12
Colour setting
13
Analog Colour
Value Description
000-041 Laser OFF
042-083 DMX mode, CH2-CH12 valid
084-125 Build in animation graphics auto running mode
126-167 Build in beam graphics auto running mode
168-209 Build in beam graphics auto running mode
210-251 Build in animation graphics auto running mode
252-255 DMX mode, CH2-CH12 valid
000-255 Selecting built-in patterns (every 2 values for one pattern)
Select the built-in 9 cartoon shows (Only valid when CH1 selected
000-255
the built-in graphics)
000-127 Manual rotation
128-159 30° rotation speed select
160-191 180° rotation speed select
192-223 Auto clockwise rotation (from slow to fast)
224-255 Auto counter-clockwise rotation (from slow to fast)
000-127 Manual rolling
128-255 X-axis rolling speed select
000-127 Manual rolling
128-255 Y-axis rolling speed select
000-127 Manual moving
128-255 X-axis moving speed select
000-127 Manual moving
128-255 Y-axis moving speed select
000-127
Select pattern size
128-159 Auto zooming (-) (from slow to fast)
160-191 Auto zooming (+)(from slow to fast)
192-255 Zooming (+/-) speed select
000-255 Select pattern size
000-255 Drawing speed select
000-255 Scanning speed select
000-007 Original colour
008-063 Select single colour
064-127 Select colour changing effects and speed
128-223 Select flowing colour effect & speed
224-255 Select color drawing effect & speed
000-255
Select analog colours (only valid under CH12 with 000-007 value)
13