ENGLISH
10
C
C
C
C
C
2
Remove the comb attachment.
3
Flip the cutting unit open.
4
Clean the cutting unit and the hair
chamber with the brush supplied.
5
Close the cutting unit by pushing it back
onto the appliance ('click').
The appliance does not need any lubrication.
Replacement
A worn or damaged cutting unit must always be
replaced with an original Philips cutting unit,
available from authorised Philips service centres.
1
Flip the cutting unit open.
2
Remove the old cutting unit by pulling it
upwards.
3
Place the two lugs of the new cutting unit
into the guiding slots.
4
Push the cutting unit onto the appliance
('click').