KitchenAid KEK1032 Mode D'emploi page 8

USING THE PRECISION KETTLE
CHANGING THE FLOW CONTROL
TIP: Prior to first use, fill the Precision Kettle with room-temperature water and pour at
each flow control setting to become familiar with the different flow rates.
Your Precision Kettle has three flow
control settings. The flow control
1
lever inside the kettle is used to
change the settings.
NOTE: After heating water, be sure to empty the Precision Kettle and allow it to cool
completely before changing any flow rate settings.
TIP: The flow control lever is meant to come out for cleaning. If you pull up too
far while changing the flow rate settings and the lever comes out, it can easily slide
back into place.
CUSTOMIZING THE KETTLE LID TENSION AND FLOW
CONTROL LEVER
If you feel the lid is too hard or too
easy to remove, try adjusting the
tension. Use a small tool, such as a
1
small screwdriver, to adjust the three
tabs on the kettle rim. Push in to
create less tension; pull out to create
more.
8 | USING THE PRECISION KETTLE
Push the lever down for more
2
restricted flow; pull the lever up
for less restricted flow.
After adjusting tabs, put the lid back
on the Precision Kettle to test the
2
setting and see if your adjustment
is satisfactory. Continue to adjust
as needed.