KitchenAid KEK1032 Mode D'emploi page 6

USING THE PRECISION KETTLE
PREPARING THE PRECISION KETTLE FOR USE
Before first use
Before using your Precision Kettle for the first time, wash the kettle and all accessories,
including the lid, with warm, soapy water, then rinse with clean water and dry. Fill the
Precision Kettle with water to the MAX fill line (see example below) and run one cycle at
the maximum temperature. To avoid damage, do not fully immerse the Precision Kettle in
water, and do not use abrasive cleaners or scouring pads.
NOTE: The entire Precision Kettle is hand wash only. To avoid damage, do not wash any
part of the Precision Kettle, its accessories, or the base with power cord in a dishwasher.
Fill the Precision Kettle with water to the
MAX fill line inside the Kettle.
6 | USING THE PRECISION KETTLE
IMPORTANT: Be sure that the vent holes
at the top of the kettle are clean and free
of obstruction, or the Precision Kettle
may overflow.
Place the base with power cord on
1
a flat, sturdy surface and plug it into
a 3 prong grounded outlet.
FOR DETAILED INFORMATION ON
USING THE PRECISION KETTLE
Visit kitchenaid.com/quickstart for
additional instructions with videos and tips
on how to use your Precision Kettle.
Since 1919