Table des Matières
Publicité
USER MAINTENANCE INSTRUCTIONS
(Cont.)
WARNING: TO PREVENT THE RISK OF BURNS, use caution
when cleaning soleplate holes. Burns can occur from touching
hot metal parts, hot water, or steam.
CLEANING SOLEPLATE HOLES
1. Be sure Iron is unplugged, Steam Dial is "OFF", and Temperature
Dial is set to "MIN".
2. Lift Water Fill Port Cover and fill Reservoir (see "Steam Ironing").
3. Plug Iron into electrical outlet.
4. Turn Temperature Dial to "LINEN".
5. As soon as Red Indicator Light turns off, unplug Iron and hold over a
sink.
6. With Soleplate facing away from you,
turn Steam Dial to steam-cleaning
position. See Figure 1. The Iron will
force steam out of the holes and clean
the holes of calcium and other mineral
deposits.
7. Set the Steam Dial back to "OFF"
position.
8. Repeat steps 1-7 until no steam comes
out of the soleplate holes.
12
Figure 1
Publicité
Table des Matières
