Installing The Car Seat In The Vehicle; Checking The Height Of The Straps - Foppapedretti MYDRIVE Instructions De Montage

2.1 INSTALLING THE CAR SEAT IN THE VEHICLE

2.2 CHECKING THE HEIGHT OF THE STRAPS

NO – Too low
• ENGLISH •
USING THE CAR SEAT
This car seat is suitable for conventional use in
all models equipped with three-point seat belts,
installed in compliance with European standards
(ECE 44 or equivalent standards).
The car seat must only be installed
IMPORTANT:
using the three-point seat belt (both lap and
diagonal belt) supplied with the vehicle.
Installation allowed
Installation not allowed
Do not use on the passenger seat shown in the
illustration if the front passenger's airbag is active.
Use on this passenger seat only if it is equipped with
a 3-point seat belt (both lap
and diagonal belt).
NO – Too high
23
YES – Correct