Mirolin CD 38NA Manuel Du Propriétaire page 6

STEP 7: Repeat steps 3 - 6 on the other side.
STEP 9: Drill holes into the Fixed Panel (2) at the 3
hole locations using a 1/8" drill bit. Fasten the Fixed
Panel (2) to the Wall Jamb (1) using the # 8 x ½'' Long
Screws provided (12).
Note: Step 11 and Step 12 determine the door swing. The two door hinge studs on the sill determine the
hinge side and swing of the door, Left or Right.
STEP 11: Place the Bottom Sill (4) across the
threshold and insert the Threaded Stud (14A) into the
hole in the Left Hand Fixed Panel (2).
All manuals and user guides at all-guides.com
STEP 8: Insert the Left Hand Fixed Panel (2) into the
Wall Jamb (1) as shown.
STEP 10: Insert Right Hand Fixed Panel (2A) into the
Wall Jamb Right (1A). Repeat steps 8 - 9 on the right
side.
STEP 12: Insert the Threaded Stud(14A) through the
hole in the Right Hand Fixed Panel (2A).
RIGHT HAND
DOOR SWING SHOWN
Door Hinge Studs
6