Assembling The Grass Bag - Toro 20899 Manuel De L'utilisateur

Figure 10
Note:
If the lever does not latch properly,
disconnect the wire from the spark plug and
check for and remove any debris buildup in the
tunnel.
5

Assembling the Grass Bag

No Parts Required
Procedure
1. Slip the grass bag over the frame as shown in
Figure 11.
1. Handle
2. Frame
Figure 11
3. Grass bag
Note:
Do not slip the bag over the handle
(Figure 11).
2. Hook the bottom channel of the bag onto the
bottom of the frame
g005310
3. Hook the top and side channels of the bag onto
the top and sides of the frame, respectively
(Figure 12).
g027156
7
(Figure 12).
Figure 12
g027157