Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
!
!
V
§
$
LxWxH ¢86x80x55
78
Mounting the fail-safe return (board)
Disconnect the actuator from the supply vol-
tage.
Take the board out of its packaging and
check for damages.
Do not touch the board itself. Electrostatic
discharge can damage the components.
Screw the three distance bolts (1) into the
assembly bolts.
Screw hand-tight.
Fasten the board (3) to the distance bolts
with the screws (2).
Plug the flat cable into the X1 connector.
Reconnect to supply voltage.
Rechargeable battery
Connect the battery via the second plug or cable
gland to the terminals ¢6 and ¢7 (4).
Attention must be given to the polarity.
Charge the battery for at least ¢2 hours.
¥ ‡
Publicité
Table des Matières
