switel BSW 200 Manuel De L'utilisateur page 12

1. Reconnect: If the camera status is "offline", you need to tap
"Reconnect" to re-establish the Internet connection.
Note: When you complete the camera set up, please tap the "Reconnect"
icon to ensure the Internet connection is successful.
2. Delete: Delete camera from Camera List.
3. Event Viewer: View event logs.
4. Change Name/Password: Change the camera name or password.
The default camera password is "admin".
To protect your privacy, we strongly
recommend you change the camera
password on a regular basis.
5. Motion Detection:
a. Enable/Disable motion detection.
b. A motion detection event can trigger the
push message alert function and motion
recording function.
Note: Motion recording is only possible
when a micro SD card is inserted into the camera. To remove
memory card, please disable motion detection first.
c. Touch the image display area of the screen and then slide onto
the screen to outline the motion detection area.
d. The interval between checks is 1 minute.
11