Operation Mode; Viewing Live Video - switel BSW 200 Manuel De L'utilisateur

3 .
Reset the camera to factory default
6
When the camera has been on for at least 1 minute, press the reset
button (using a small object or a pin) for 5 to 10 seconds.
The camera will beep 3 times and take about 1 minute to reset. The
LED will start to blink a dark orange color.
Note 1: If you do not hear a beeping sound, reset has failed. Please
Note 2: If you replace a new Wi-Fi router or if you forget the camera
4

Operation Mode

4 .

Viewing Live Video

1
turn the camera back on and press the rest button again.
password, the camera needs to be reset to factory default.
Please refer to 3.3 - First time setup in the user manual, to
set up the camera again.
1
2
3
4
5
6
9