das Gerät niemals unter fließendem Wasser! Verwenden Sie zur Reinigung keine lösungsmittelhaltigen
Reinigungsmittel.
CE Konformitätserklärung:
Dieses Produkt ist nach den unten aufgelisteten Richtlinien hergestellt worden:
LVD 2014/35/EU
EMC 2014/30/EU
RoHS 2011/65/EU
RED 2014/53/EU
Adresse:
SEBSON
Sebastian Sonntag
Gernotstr.17
44319 Dortmund
Germany
Mail: support@sebson.de
UST-IDNr.:DE246981805
WEEE-Reg.-Nr. DE 78960174
Manual
Thank you for choosing a product of SEBSON. Please read the instructions carefully and keep them for looking up
before start-up this product. A long and failure-free operation can only be guaranteed if the installation and start-up
is done properly. Before starting up this product, please check for external damage. In case of visible external
damage we immediately dis-advise the start-up of this product! Please remove all packaging material of this product
before the first start-up an and check the content for completeness!
Intended use:
This active motion detector generates high-frequency electromagnetic waves (5.8 GHz) and receives their echo
after hitting moving objects, regardless of their temperature. This signal is then sent to a connected light, for
example, which then switches itself on.
Scope of delivery:
1 motion detector
Screws for fixing (2 pieces)
Dowels Ø 6mm (2 pieces)
General safety information:
The installation of this product may be done only by a qualified person according the valid regulations for
Danger:
electrical installation!
If the power cables are damaged or come into contact with wetness, immediately disconnect the product
Danger:
from the power supply and ensure that it cannot be switched on again!
Danger of suffocation:
parts that can be swallowed!
Avoid overloading the device, an overload can damage the device or cause a short circuit! Therefore,
Caution:
please note the maximum power consumption in the technical data!
Please keep this product away from children and animals. The packaging contains small
8