GE 28041 Guide D'utilisation page 42

1 2 3 4 5
ENTER NUMBER
REC RING TONE
RING MELODY 1
RING MELODY 2
RING MELODY 3
RING MELODY 4
SET RINGER TONE
NOTE: When a picture is assigned to a phone book entry a "*" will
appear beside the entry.
DEFAULT :
NO PICTURE ID
PICTURE ID
Storing the Last Number Dialed
Store a dialed number when reviewing it:
1. Make sure the phone is OFF (not in talk mode).
. Press the REDIAL button on the handset to access the DIALED menu.
. Use the 6 or 5 button to scroll to desired record.
4. Press SELECT button and the display shows STORE?.
5. Press SELECT button again to confirm and the display shows ENTER NAME.
6. Repeat Steps 6 through 1 in the section Adding Phone Book Entries, except
instead of entering the number as indicated in Step , the dialed number shows
on the display.
4
All manuals and user guides at all-guides.com
7. Press the SELECT button to save the name. The display
shows ENTER NUMBER.
. Use the number keys to enter the telephone number (up to
0 digits, including pauses).
9. Press the SELECT button to save the number. The display
shows SET RINGER TONE.
10. Use the 6 or 5 button to scroll to your desired ringer
tone. You will hear a sample of the ringer tone you select.
11. Press the SELECT button to save your selection. The
display shows PICTURE ID.
1. The display shows DEFAULT: NO PICTURE ID.
Use the 6 or 5 button to scroll to your desired picture.
1. Press the SELECT button to save the record. You will hear
a confirmation tone and the display shows the whole
record for  seconds.
14. To enter another name and number, return to step 4 and
repeat the process.