Table des Matières
Publicité
29
model no. 052-1899-2 | contact us 1-800-689-9928
Measuring Sound Level
You can use the meter to measure sound level with the built-in sound
sensor. The sensor is located near the mark "dB" on the top of the
meter (Figure 2).
1.
2.
3.
All manuals and user guides at all-guides.com
Set the range switch to "dB" position.
Point the sound sensor to the sound source to be measured
(Figure 4).
Read the reading on the display.
NOTE:
1.
The sound level measurements are affected by noise of
environment, location of the meter, and the distance
between the sensor and the sound source.
2.
Place a windscreen (not supplied) in front of the sensor in
windy conditions because the meter may give a wrong
reading in strong wind environment (wind speed >10 m/s).
Figure 4
Publicité
Table des Matières
