Table des Matières
Publicité
Press "REL" button. The meter enters Relative mode and stores
1.
the present reading as a reference for subsequent measure-
ments. "REL" appears on the display as an indicator. The display
reads zero.
The display shows the difference between the reference and a
2.
new measurement.
Press "REL" button again. The meter exits Relative mode.
3.
Data Hold Mode
After pressing the "HOLD" button, the present reading is held on the
display, meanwhile " " is displayed on the display as an indicator.
To exit the Data Hold mode, press the button again. The indicator
" " disappears.
Manual Ranging and Autoranging
The meter defaults to autorange mode in measurement functions
which have both autorange mode and manual range mode. When the
meter is in autorange mode, "AUTO" is displayed.
To enter manual range mode, press the "RANGE" button. The
1.
meter enters manual range mode and "AUTO" turns off. Each
press of the "RANGE" button increases the range. When the
highest range is reached, the meter wraps to the lowest range.
All manuals and user guides at all-guides.com
20
Publicité
Table des Matières
