Sharp LL-B270 Mode D'emploi page 15

nProduct specifications
Model
LCD component
Max. resolution (pixels) 1920 x 1080
Max. colors
Pixel pitch
Brightness (typical)
Contrast ratio (typical)
Viewing angle
Screen active area inch (mm) 23-1/2 (W) x 13-1/4 (H)
Plug and play
Input Video
terminals
Output Headphones
terminal
Power requirement
Operating temperature *
2
Operating humidity *
2
Power consumption
(During normal operation/during
input signal waiting mode)
Dimensions
(excluding protrusions)
inch (mm)
Weight lbs. (kg) Approx. 8.6 (3.9)
*1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time.
Due to the nature of the equipment, it is not possible to precisely maintain a constant level of brightness.
*2 In such cases, please check the temperature condition specified by the optional equipments.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
Specifications
LL-B270
27" Class
[27-1/16 inch (68.7 cm) diagonal]
TFT LCD
Approx. 16.77 million colors
0.311 mm (H) × 0.311 mm (V)
2 1 2
250 cd/m * (default: 200cd/m
3000: 1
178° right/left/up/down (contrast ratio ≥ 10)
(597.6 x 365.15)
VESA DDC2B
HDMI x 1
Mini D-sub 15 pin, 3 rows x 1
3.5 mm mini stereo jack x 1
AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter), DC 19 V
32°F to 104°F (0°C to 40°C)
10% to 85% (no condensation)
40W/0.5W
(when using the supplied AC adapter)
Approx. 24-1/8 (W) x 8-11/16 (D) x
17-1/2 (H) (613 x 220 x 444)
LL-B240
23.8" Class
[23-13/16 inch (60.5 cm) diagonal]
TFT LCD
0.2745 mm (H) × 0.2745 mm (V)
)
20-3/4 (W) x 11-11/16 (H)
(527.04 x 296.46)
30W/0.5W
(when using the supplied AC adapter)
Approx. 21-1/4 (W) x 7-1/16 (D) x
15-13/16 (H) (539 x 180 x 402)
Approx. 7.1(3.2)
13
E