Quick Start - Numark NV II Guide D'utilisation Rapide

Quickstart Guide (English)
Introduction
Box Contents
NV
II
Power Cable
USB Cable
Software Download Card
Quickstart Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit numark.com/nvii.
For additional product support, visit numark.com/support.

Quick Start

1. Install the Drivers and Software
Windows users only: Install the drivers before installing the software.
Drivers (Windows users only): Download and install the latest drivers from numark.com/nvii.
(You will be asked to connect the NV
Software: Download and install the latest version of Serato DJ from serato.com.
2. Connect and Start DJing!
Follow this sequence of steps whenever you use NV
1. Make sure all devices are off and all faders and gain knobs are set to "zero."
2. Connect input sources (microphones, CD players, etc.) to the NV
3. Connect output devices (power amplifiers, sub-mixer, recorders, etc.) to the NV
4. Plug all devices into power sources, and turn on devices in proper order:
•
When starting a session, turn on (1) input sources, (2) NV
•
When ending a session, turn off (1) output devices, (2) NV
5. Connect the NV
headphones.
6. Open Serato DJ and go! For more information on how to use Serato DJ with NV
serato.com/dj/support
to your computer during installation.)
II
to your computer with the USB cable (included) and to your
II
and select Numark NV.
Important: Download the full NV
User Guide from numark.com/nvii.
:
II
.
II
, (3) output devices.
II
, (3) input sources.
II
II
.
II
, visit
II
3