EN
Troubleshooting
If the device is not working properly, please check fi rst of all whether you are able to
rectify a problem yourself.
Do not attempt to repair a defective device yourself!
Problem
The device does not
work. The control
light doesn't light up.
Odour produced
The device switches
off during use.
Technical Data
Article number:
Model number:
Voltage supply:
Power:
Protection class:
Disposal
The packaging material is recyclable. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner. It should not be
disposed of in the normal domestic waste. Dispose of it at a recycling centre for
used electrical and electronic devices. You can obtain more information from
your local authorities.
Possible cause / solution
•
Is the plug not inserted in the mains socket correctly?
Insert the plug correctly.
•
Is the plug socket defective? Try another plug socket.
•
Check the fuse of your mains connection.
•
When the device is fi rst used: A smell often develops when
new devices are fi rst used. The smell should disappear af-
ter you have used the device several times.
•
The device has already been used: Is any hair, fl uff or dust
in the air outlet and intake opening? Clean the device in the
manner described in the "After Use" chapter.
•
The overheating protection has been triggered. Follow the
instructions in the "Overheating Protection" chapter.
•
The device has a sensor touch function: It automatically
switches off when you let go of the handle and switches on
when the sensor on the handle is touched. When blow dry-
ing your hair, make sure that you are touching the sensor
on the handle with the palm of your hand.
Z 03040
HD2010
220 – 240 V~, 50/60 Hz
1800 – 2000 W
18
Customer Service / Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls to German landlines are
subject to charges. The cost varies
depending on the service provider.)
All rights reserved.