Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Table of Contents
Safety Information ............................. 2
Work Area Safety ............................2
Personal Safety ..............................3
Transporting ...................................3
Pneumatic Tool Safety ....................3
Electrical Safety ..............................4
(Extension Cords) ...........................4
(Electrical Connection) ...................5
(Speed And Wiring) .........................5
Safety Information
This manual contains information that is
important for you to know and understand.
This information relates to protecting YOUR
SAFETY and PREVENTING EQUIPMENT
PROBLEMS. To help you recognize this
information, we use the symbols below.
Please read the manual and pay attention to
these symbols.
DANGER: Indicates an
imminently hazardous situation
which, if not avoided, will result
in death or serious injury.
WARNING: Indicates a
potentially hazardous situation
which, if not avoided, could
result in death or serious
injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice
not related to personal injury
which, if not avoided, may result
in property damage.
WORK AREA SAFETY
1.
Keep your work area clean and well lit.
Ensure oors are not slippery from wax
or dust.
(Grounding Instructions) ................5
Warranty ............................................. 6
Speci cations ..................................... 6
Duty Cycle........................................... 6
Package Contents ............................... 7
Assembly ............................................ 9
Operation ......................................... 10
Maintenance ..................................... 12
Storage ............................................. 16
Troubleshooting ................................ 16
2.
the presence of ammable liquids, gases,
or dust. Power tools create sparks which
may ignite the dust or fumes. Keep
bystanders, children, and visitors away
while operating tools. Distractions can
cause you to lose control.
3.
Operate air compressor in an open area
at least 18 in. (0.5 m) away from any
wall or object that could restrict the
ow of fresh air to ventilation openings.
4.
Always disconnect the air
supply and power supply before
making adjustments, servicing a
tool, or when a tool is not in use.
5.
This compressor/pump is not
equipped and should not be
used to supply breathing
quality air. Additional equipment would
be necessary to properly lter and
purify the air to meet minimal
speci cations for Grade D breathing as
described in Compressed Gas
Association Commodity Speci cation G
7.1 - 1966, OSHA 29 CF9 1910.134.
Compressed Gas Association, 4221
Walney Road, Fifth Floor, Chantilly, VA
20151-2923, (703) 788-2700, www.
cganet.com. Any such additional
2
Do not operate power
tools in explosive
atmospheres, such as in
Publicité
Table des Matières
Dépannage
