Optional: Attack Kayak Seat; Optional: Kajak-Sitz Befestigen - SPORTSTECH WPB320 Manuel

9. OPTIONAL: CAMERA MOUNT
1. Take the camera mounting adapter out of the holder on the board. Connect securely to the camera.
2. Open the safety clip on the mounting adapter. Push the camera with the mounting adapter into the
holder on the board. Close the safety clip.
• Check that the camera is firmly in place. Sportstech is not liable for loss or damage.
10. OPTIONAL: ATTACH KAYAK SEAT
• A kayak seat is not included. A standard kayak seat for SUP boards with four straps can be
attached.
• A kayak paddle with two paddle blades is not included.
1. Place the kayak seat in the middle between the four fastening rings (see overview drawing).
2. If necessary, select the position of the seat so that there is still enough space in front of the seat in the
area of the handle for kneeling or standing.
3. Fasten the two front straps securely to the two front rings. Then attach the two rear straps securely to
the rear rings.
4. If necessary, adjust the length of the front and/or rear straps so that you can sit comfortably upright
even during vigorous paddling.
5. After use, remove the kayak seat and clean and dry it appropriately.
25
EN