DESCRIPTION OF PARTS
Description of parts
1 On/Off switch
2 Handle
3 Battery
4 Battery lock/release button
5 Handle wing nut
6 Adjustable handle
7 Adjusting collar
8 Shaft
9 Button for head rotation
10 Trimmer head
11 Plant protector
12 Cutting guard
13 Ventilation slots
14 Button for head angle adjustment
15 Wheels for border function
16 Battery charger
17.LED indicator
18.Blade
19.Blade disc
CHARGING PROCEDURE
For Your Safety
Warning! Switch off, remove
battery from machine before
adjusting or cleaning.
The blade continues to rotate for a few seconds
after the trimmer is switched off.
Caution – do not touch rotating blade.
The battery must be charged for
approximately 4 hours before
using it for the first time.
Use only the original charger
Use charging unit only in dry rooms!
1. Remove the battery from the grass trimmer
2. Connect the charger to the power mains
Instructions for the handling of the charger:
• Red LED is on: Battery is being charged.
• Green LED is on: Charge process completed.
Charging Advice
With continuous or several repetitive charging
cycles without interruption, the charger can warm
up. This is not harmful and does not indicate a
technical defect of the unit.
A battery that is new or has not been used for a
longer period does not develop its full capacity until
after approximately 5 charging/discharging cycles. A
significantly reduced working period after charging
indicates that the batteries are worn out and must
be replaced.
General instructions regarding the battery
In order to maintain the long service life of the
battery, always follow the instructions below:
• The lawn trimmer will be automatically switched off
when the battery voltage is low. The battery must
then be recharged before the trimmer can be used
again.
• Always recharge the lithium-ion battery prior to any
prolonged period of nonuse, i.e. before storing the
trimmer away in autumn.
• The charging time is 4 hours for a battery that is
completely empty.
- LI-ION BATTERY
Advantages of Li-ion batteries :
- Li-ion batteries have a higher capacity/weight ratio
(more power for less heavy, more
compact, battery)
- No memory effect (capacity loss after several
charge/discharge cycles) like other type
batteries. (Ni-Cd, Ni-MeH ..) .
- Limited self discharge.
ASSEMBLY
This manual gives instructions on the correct
assembly and safe use of your machine. It is
important that you read these instructions carefully.
Do not insert the battery before
product is completely assembled.
Ensure product is assembled in
the following order:
Fitting the trimmer head with telescopic tube
assembly
Insert the telescopic tube assembly into the trimmer
head illustrated i, making sure the arrow on the
trimmer head match with the arrow on the telescopic
tube assembly.
Mounting the Cutting Guard
Place the cutting guard on the trimmer head.
Fit the guard onto trimmer head and push till secure
fitting.
For safety, the guard can not be
disassemblied after fit to the
trimmer head.
27