Kicker CX Série Manuel D'utilisation page 2

Masquer les pouces Voir aussi pour CX Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Authorized KICKER Dealer:
Purchase Date:
Model Number:
Serial Number:
WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! Turning up a
system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at the same
volume level. The threshold of pain is always an indicator that the sound level is too loud and may permanently damage your
hearing. Please use common sense when controlling volume.
PERFORMANCE
Model:
RMS Power [Watts]
@ 14.4V, 4Ω mono, ≤ 1% THD+N
@ 14.4V, 2Ω mono, ≤ 1% THD+N
Length [in, cm]
Specifi cations common to all models:
Height [in, cm]
Width [in, cm]
Frequency Response [Hz]
Signal-to-Noise Ratio [dB]
Input Sensitivity
Electronic Crossover
KickEQ™ Bass Boost
Subsonic Filter
Remote Bass
Pro Tip: To get the best performance from your new KICKER Amplifi er and extend the warranty by 1 year, use
genuine KICKER accessories and wiring.
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no items
behind the area where the screws will be driven. Choose a location that allows at least 4" (10cm) of open
ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment. Drill
four holes using a 7/64" (3mm) bit and use the supplied #8 screws to mount the amplifi er.
The KICKER CX Amplifi ers are capable of space-saving vertical mounting. Use a 2.5mm hex key (Allen wrench)
to loosen the end panel, remove the existing brackets, then insert and tighten the double-slotted brackets to the
amplifi er as illustrated on the next page.
2
2016 CXA Mono Amps Rev F.indd 2
2016 CXA Mono Amps Rev F.indd 2
MODEL:
CXA300.1
150W x 1
300W x 1
8-1/8, 21
2-3/8, 6
7-3/16, 18
25–200
>95, A-weighted, re: rated power
Low Level: 125mV–5V
High Level: 250mV–10V
Variable Lo-pass 50Hz–200Hz, 12dB/octave
Variable 0–12dB @ 40Hz
25Hz, 24dB/octave
Yes (sold separately)
CX.1-SERIES AMPLIFIERS
OWNER'S MANUAL
CXA300.1 | CXA600.1
CXA1200.1 | CXA1800.1
CXA600.1 CXA1200.1 CXA1800.1
300W x 1
600W x 1
600W x 1
1200W x 1
8-1/8, 21
12-1/16, 31
900W x 1
1800W x 1
13-5/8, 34.6
9/24/2015 4:30:48 PM
9/24/2015 4:30:48 PM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cxa300.1Cxa600.1Cxa1200.1Cxa1800.1

Table des Matières