Code; Barring And Locking; Connections - Depaepe Boreal 5ML Hotel Notice D'utilisation

11 – CODE Pick up handset or press
Factory code is "0000".
If you want to change the code proceed as follows (Phone connected and off hook):
(beep)
(beep) (beep)
(beep)(beep)
PGR
« » « » « » « 0000 » (Old Code) (2 sharp sounds in the handset confirms the
PGR
operation) « NNNN »(New code) « » (2 sharp sounds in the handset confirms the operation)
(beep)(beep)
Lost code:
*
2
Phone on hook, press and keep « » « » « » keys pressed , pick up the handset and release
#
the keys (2 sharp sounds in the handset confirms the operation) the phone is totally reset (Memories
are erased and the phone gets back to factory settings)

12 - BARRING AND LOCKING

To activate or deactivate the barring and locking function: Phone on hook, press and keep « »
*
key pressed, pick up the handset, release the key and dial the 4 digits code (0000 Factory setting).
The unlocked phone gets locked.
The locked phone gets unlocked.
When the phone is barred, no programming, no memories are possible. The keypad can be used but
only up to 4 digits.

13 - CONNECTIONS

Line cord
14