Troubleshooting Guide; Specifications - Kenwood KTC-9090DAB Mode D'emploi

Troubleshooting Guide

What might appear to be a malfunction in your unit may just be the result of slight
misoperation or miswiring. Before calling service, first check the following table for
possible problems.
?
The DAB mode cannot be selected.
✔ The DAB connection cable is not connected.
Use the DAB connection cable to connect the control unit and the DAB hideaway tuner.
✔ The PROTOCOL selection switch of the changer switching unit "KCA-S210A" is not set properly.
Set the PROTOCOL selection switch to "N" position.
?
The frequency is displayed, but no sound can be heard.
✔ The DAB antenna is not connected.
Connect it properly by referring to <Connecting Cables to Terminals>.
✔ The unit is outside the reception area.
Try receiving after you have entered the receiving area.
?
Nothing happens when the buttons are pressed.
✔ The computer chip in the unit is not functioning normally.
Press the reset button on the Control unit .
?
No sound can be heard, or the volume is low.
✔ The input/output cables or wiring harness are connected incorrectly.
Reconnect the input/output cables and/or the wiring harness correctly. See the section on <Connecting Cables to
Terminals>.
?
No switching to the Secondary with B and F group.
✔ The language is set under the Language Filter Select Mode function.
Set the Language Filter to off or select another language.

Specifications

Specifications subject to change without notice.
DAB tuner section
Frequency range (L Band) ...........................................................................................1452.960 MHz — 1490.624 MHz
Frequency range
Usable sensitivity (L Band) ..........................................................................................- 10 dBm — - 97.5 dBm
Usable sensitivity
Mode .......................................................................................................................................Mode I, II, III, IV
General
Operating voltage ...........................................................................................................14.4 V (11 — 16 V allowable)
Current consumption ....................................................................................................450 mA
Installation size (W × H × D) ......................................................................................143 × 45 × 105 mm
Weight: ...................................................................................................................................537 g
Downloaded from:
(Band III) ..........................................................................................174.928 MHz — 239.200 MHz
(Band III) ......................................................................................... 0 dBm — - 100 dBm
http://www.usersmanualguide.com/
29
|
English