Regional Announcement Function; Dynamic Range Control (Drc); Automatic Switching Dab Priority - Kenwood KTC-9090DAB Mode D'emploi

DAB features (Step Up)
➠
• This function does not reduce the listening volume in the
DAB and tuner modes. The volume set here is recalled only
when it is larger than the volume which is currently used
in the DAB or tuner mode.
• Setting the volume unique to the announcement
and turning Announcement select mode on with
the minimum volume results in only the desired
announcement being heard.
• As for E and F group, refer to <Pre-setting the Volume
for Traffic Information/News> of the RDS function.

Regional Announcement Function

The interruption of the announcement such as
the Alarm of either a restricted region where the
programme is being received (regional restriction
ON) or all regions (regional restriction OFF) can be
selected.
ABCDG
1
Display the menu mode using the control unit
and select a setting item.
Select the "REG ASW"/ "REG INT"/ "REGA"/ "REG"/
"Regional ASW" display.
2
Switch the setting of menu items.
"ON": Regional on
"OFF": Regional off
3
Exit menu mode.
E F
Set this function on the DAB Setup Screen.
(page 8 - 9)
NOTE
• This setting is valid only with the DAB source.
20
|
English
Downloaded from:
ABCDEFG
http://www.usersmanualguide.com/

Dynamic Range Control (DRC)

In the case that the producer of a programme
wants to adjust dynamic range, DRC information
is transmitted. Whether to receive the DRC or not
can be selected and set according to listeners'
preference.
ABCDG
1
Display the menu mode using the control unit
and select a setting item.
Select the "DRC" display.
2
Switch the setting of menu items.
"ON": Functioning
"OFF": Not functioning
3
Exit menu mode.
E
Set this function on the DAB Setup Screen.
(page 8)
F
Touch [DRC] on the DAB Control Screen.
NOTE
• As the dynamic range is changed based on the Dynamic
Range Control information sent from a Service provider,
this function does not work whilst no information is being
transmitted from the Provider.
• When the Dynamic Range Control (DRC) is set ON, the
sound volume is somewhat lower.
Also, if the DRC data can't be cleanly demodulated, the
DRC may be invalid.
AıÇΉFG

Automatic Switching DAB priority

RDS/DAB provides information when the DAB
service and RDS station are broadcasting the same
programme.
When the receiving signal of a DAB station
deteriorates, the reception can be switched
automatically to the RDS station broadcasting the
same radio programme, allowing listeners to continue
listening to the same programme.
On the contrary, when an RDS station is being
received, the reception can be switched automatically
to the DAB station broadcasting the same radio
programme, allowing the same programme to be
heard at a higher sound quality.
ABCDEFG
4
(except for A* )