Automatic Switching From Dab To Rds - Kenwood KTC-9090DAB Mode D'emploi

Service of DAB:
RDS:
Source mode:
RDS:
Service of DAB:
Source mode:
AG
1
Display the menu mode using the control unit
and select a setting item.
Select the "DAB PRIORITY"/ "DAB-P"/ "DABP"/
"Priority DAB"/ "PRIORITY" display.
2
Switch the setting of menu items.
"ON": Functioning
"OFF": Not functioning
3
Exit menu mode.
F
Set this function on the DAB Setup Screen.
(page 9)
NOTE
• When the receiving signal of a DAB station deteriorates,
the reception can be switched to the RDS station, however,
when the receiving signal of a DAB station recovers, the
reception can be switched to the previous condition.
The DAB indicator blinks during the period of switching to
the RDS station. (except for F)
• Switching the reception from the RDS station to the DAB
station causes switching the source mode to the DAB
source. After this, every operation enters DAB mode. For
selecting other FM/AM stations, switch the source mode to
the TUNER source mode before selecting.
• If the tuner of the Control unit provides no RDS function,
this function does not work.
• It takes at least 10 seconds after receiving the RDS signal to
switch from the RDS station to the DAB service.
Downloaded from: http://www.usersmanualguide.com/

Automatic Switching from DAB to RDS

Presently, the coverage areas of DAB stations are
smaller than those of RDS stations.
Therefore, when the receiving condition of a DAB
station deteriorates, the reception can be switched
automatically to the RDS station broadcasting the
same radio programme to minimize the sound
interruption. The DAB indicator blinks during the
period of switching to the RDS station.
Service of DAB:
RDS:
BCD
1
Display the menu mode using the control unit
and select a setting item.
Select the "SW RDS"/ "RDS CHG"/ "RDS"/ "Switching
to RDS" display.
2
Switch the setting of menu items.
"ON": Functioning
"OFF": Not functioning
3
Exit menu mode.
E
Set this function on the DAB Setup Screen.
(page 8)
NOTE
• When the receiving signal of the DAB station recovers, the
reception can be switched to the DAB source.
• If the tuner of the Control unit provides no RDS function,
this function does not work.
ÅBCDEÏÌ
21
|
English