Dab Features (Search); Programme Type (Pty) Function - Kenwood KTC-9090DAB Mode D'emploi

DAB features (Search)

Programme Type (PTY) Function

This function permits desired programme types from
within the received Ensemble to be searched and
monitored.
1
Entering PTY Selection Mode:
Press the [38] (PTY) button.
If your control unit does not have [38] (PTY)
button, press [FM] (■PTY) button for at least 1
second.
As for G-group, press the [#2] (■PTY) button for
at least 1 second.
"PTY" is displayed and the Programme Type
Selection (PTY) Mode entered.
NOTE
• This function cannot be used during the interruption of
the announcement/ PTY Watch.
2
Select the programme type
• Each time the [FM] / [AM] button is pressed
the programme type switches.
As for the available programme type, refer to the
<Programme Type Display>.
• Press the pre-set button for direct selection.
Default settings are pre-set as follows:
[1]. Music
[3]. News
[5]. Serious Classical
NOTE: Changing the preset programme types
• Select the programme type to be preset and hold down
a preset button ([1] - [6]) for two seconds or more. The
previously preset programme type is cleared and replaced
with the newly selected programme type.
• As for G-group, refer to <Program Type preset> of the
RDS function. See the control unit instruction manuals for
its operations.
3
Search a service of the selected programme
type
Press the [4] or [¢] button.
When the selected programme type is found, the
letters indicating the result of the search (Service
label, etc.) are displayed and the programme is
received.
NOTE
• If the selected programme type is not found, the message
("NO PTY", etc.) is displayed.
When searching for a service of another programme type,
repeat procedures 2 and 3.
Downloaded from:
ABCD‰ÏG
[2]. Speech
[4]. Other Music
[6]. Varied
http://www.usersmanualguide.com/
Switching to Another Service:
Repeat procedure 3.
Another service of the same programme type will
be searched.
Cancelling Search In the Middle:
Press the [38] (PTY) button.
If your control unit does not have [38] (PTY)
button, press [FM] (■PTY) button for at least 1
second.
As for G-group, press the [#2] (■PTY) button
for at least 1 second.
NOTE
• This setting is valid only with the DAB source.
Searching by programme type and
language:
1
Press the button whilst in programme type
selection mode.
3
A* : Press the [T.I]/ [AUTO] button.
+
AB G: Press the [DISP]/ [SCRL] button.
2
Selecting a language:
Press the [FM] or [AM] button.
As for the available languages, refer to the
<Language Filter Search Mode>/ <Language Filter
Select Mode>. (page 17)
3
Searching by the selected programme type
and language:
Press the [4] / [¢] button to start searching.
4
Exiting: Press the [T.I]/ [AUTO]/ [DISP] / [SCRL]
button.
Languages to be displayed:
+
AB G
Select English, French, German, Dutch, Spanish,
Portuguese, Norwegian or Swedish in <Language
Filter Search Mode>/ <Language Filter Select
Mode> to display in the selected language. (page
17)
+
BCD (except for B )
1
Press the button whilst in programme type
selection mode.
B: Press the [DISP] button.
CD: Press the [38] (PTY) button for at least 1
second.
+
AB ÇΉÏG
ABCD‰ÏG
➥
15
|
English