Package Contents; Installation Overview - STEINEL HBS 300 Consignes D'installation

2
• Turn power off at the circuit breaker before installing the sensor
• Sensor must be installed and used in accordance with appropriate electrical codes and
regulations
• Installation by a qualifi ed electrician is recommended

Package Contents

• HBS 300 or HBS 200 sensor
• Two 1/2" KO locknuts
• Installation instructions

Installation Overview

Needed for installation
• 3 wire nuts for termination
Applications
• HBS 300: Open areas where 360
degree coverage is needed such as
warehouses, distribution centers,
gymnasiums
• HBS 200: High bay aisle way areas
www.steinel.net (800) 852-4343
All manuals and user guides at all-guides.com
WARNING
Intended uses
• For indoor use only
• For individual fi xture lighting control
HBS 300 Product Overview
120/230/277
PIR
VAC
50/60Hz
Product description
The HBS 300 sensor provides effective lighting
control in high bay open area applications
such as warehouses. The sensor contains
three dual-element pyroelectric detectors
Specifi cations
Voltage 120/230/277 VAC, 50/60 Hz
Load rating 120 VAC: 0-800 watt ballast or Tungsten - 1/4 hp
230/277 VAC: 0-1200 watt ballast
Time delay 15 sec to 30 min
Light level .2 - 200 footcandles ; 2 - 2000 lux
Coverage 360°, up to 22 ft (6.7 m) radial reach, up to 60 ft (18.2 m) tangential reach
Environment IP20 rated, -4°F to +122°F, -20°C to +50°C
Dimensions
3.9 x 3.9 x 2.6 in; 99 x 99 x 66 mm
nipple length .62 in (15.75 mm)
5 year warranty
UL and CUL Listed, RoHS Compliant
1
2
5
ON
High
Low
1 2 3 4
4
3
1 1/2 inch threaded nipple 4 Light level trimpot
2 Lock nuts 5 Detection lens
Time delay setting DIP switch
3
Fixture
or J Box
IP20
Mount
360°
and is engineered to perform at a wide range
of mounting heights, up to 45 feet. It mounts
directly to a high bay lighting fi xture, or to a
junction box.
10
20
30
40
50 40 35 ft 35 ft 40
22 ft 22 ft
www.steinel.net (800) 852-4343
3
50