How It Works - GE 20 Manuel D'utilisation

About TurboCool.
(on some models)
(on some models)
(on some models)
(on some models)
(on some models)
(on some models)
™
(on some models)

How it Works

TurboCool rapidly cools the refrigerator
compartment in order to more quickly
cool foods. Use TurboCool when adding
a large amount of food to the refrigerator
compartment, putting away foods after they
have been sitting out at room temperature or
when putting away warm leftovers. It can also
be used if the refrigerator has been without
power for an extended period.
Once activated, the compressor will turn
on immediately and the fans will cycle on
and off at high speed as needed for eight
hours. The compressor will continue to run
until the refrigerator compartment cools to
approximately 34°F (1°C), then it will cycle on
and off to maintain this setting. After 8 hours, or
if TurboCool is pressed again, the refrigerator
compartment will return to the original setting.
About Door Alarm
(on some models)
The door alarm will sound if any door is open
for more than 2 minutes. The beeping stops
when you close the door.
About Energy Saver
(on some models)
This product is equipped with an Energy Saver
feature. The refrigerator is shipped with the
Energy Saver feature enabled.
Over time, moisture can form on the front
surface of the refrigerator cabinet and cause
rust. If moisture does appear on the front
surface of the refrigerator cabinet, turn off the
Energy Saver feature by pressing and releasing
the ENERGY SAVER pad on the control panel.
How to Use
Press TurboCool. The refrigerator temperature
display will show .
After TurboCool is complete, the refrigerator
compartment will return to the original setting.
NOTES: The refrigerator temperature cannot
be changed during TurboCool.
The freezer temperature is not
affected during TurboCool.
When opening the refrigerator door
during TurboCool, the fans will
continue to run if they have cycled on.
GEAppliances.com
5