AGICITY™ DUO & PRO Manuel de configuration
2.
http.listening.port=12800
•
the port number on which the lccl must deploy its webserver.
o
transaction.stop.with.error
•
if true and an error occurs during a transaction, the transaction will be stopped,
o
otherwise the transaction is suspended.
transaction.when.offline.stop.in.state.A
•
default false. If set to true the transaction is stopped when the chargepoint is offline
o
and the state changes to A: cable removed from the car side.
transaction.remotelystarted.when.offline.stop.in.state.A false
•
default false. If set to true the transaction is stopped when the chargepoint is offline
o
and the transaction is remotely started and the state changes to A: cable removed
from the car side. With stopping the transaction the cable will also be unlock at the
chargepoint, and can the user retrieve its cable.
transactions.keep.max
•
default 20, the maximum of transactions to keep on disk so it can be viewed on
o
page /admin/transactionsList.html.
config.preset=none
•
When this setting is set, the configuration for this preset is set on the chargepoint. The
o
preset has several configuration entries defined which will be applied.
chargepoint.upgrade.as.backprocess=true
•
enables the upgrade procedure that runs in the background; it will start
o
downloading the zip file but only start installing with all connectors are available.
chargepoint.upgrade.as.backprocess.scheduled.to.off=false
•
When upgrading as a backproces do set the connectors to scheduled to off, this
o
way when a connector becomes available nobody else can start a new transaction
until ALL transactions are stopped on all connectors AND after a reboot
chargepoint.report.meter.0=true
•
for FKN and MRA_FKN, the chargepoint can report the metervalues of connector 0.
o
chargepoint.report.failed.meter.0=false
•
If reading the meter fails, should the chargepoint be set to error state and no longer
o
allow any charging.
Chargepoint settings
IS69685-frn - Rév.01-Novembre 2020
Page 43 sur 49