Volume Control - Velodyne CHT-8R Mode D'emploi

PHASE - These buttons allow you to optimize the subwoofer
performance for the location and your listening position. Select the
switch position at which you hear the most bass. The light will blink
according to the following schedule:
0 degrees
90 degrees
180 degrees
270 degrees
LIGHT - If you wish, you can deactivate the power light on your CHT-R
unit. To do this, press the LIGHT button on your remote. The light will
turn off. To reactivate the light, press the LIGHT button again.
-
NIGHT Night mode limits the maximum output of the subwoofer for
later night listening or to be more considerate of close neighbors.
Press the night button to turn the night mode feature on or off. Night
mode, when active, is indicated by the reduced intensity of the light.

VOLUME CONTROL

from the subwoofer to the main speakers in your system. This control
should be set to achieve similar volume level from between both the
main speakers and subwoofer. When pressing volume up or down,
the speed at which the power light blinks indicates subwoofer volume
- the faster the blinking, the louder the unit plays.
Note: The volume can also be adjusted via the buttons on the back
panel of the subwoofer. These buttons have the same effect as
pressing the up and down volume buttons on your remote.
-
PRESETS There are 4 presets, consisting of Movies, R&B – Rock,
Jazz – Classical, and Games. As a preset is chosen, the light flashes
the corresponding number of times. The presets provide the following
characteristics for bass reproduction:
Movies:
R&B – Rock:
1 blink
2 blinks
3 blinks
4 blinks
-
This control allows you to balance the output
Maximum output and impact for explosions
and other action adventure movie content.
Provides the driving bass found in today's
rock music.
10