Philips AVENT SCF304/60 Mode D'emploi page 11

How to clean and sterilise
your pump
(see diagram A)
NEVER WASH OR STERILISE...
the control handle (a), twin
m
tubing (k), double pumping
k
a
l
connector (l) or pump motor (m).
These components DO NOT come
into contact with your breast milk.
You can wipe the pump motor and control handle clean, using a soft cloth.
Cleaning and sterilising the pump bodies
Before you use your breast pump for the first time
and every time before use, you must disassemble,
wash and sterilise all the breast pump parts that
come into contact with your breast milk.
You can use the dishwasher (top rack only) or hand
wash in warm, soapy water and then rinse thoroughly.
Sterilise these parts in a steam steriliser (digital,
electric or microwave), or by boiling in water
for 5 minutes.
Do not use antibacterial or abrasive cleaners or
detergents as they may cause the plastic to crack.
To clean the valve, rub gently between your fingers
s
in warm soapy water – do not insert objects as this
may cause damage.
Keeping your pump sterile and
d
compact for travel
g
After sterilising all parts, insert the white valve and
diaphragm into the pump body (d) and clip the funnel
h
cover (h) over the Let-down Massage Cushion (g).
Now screw the sealing base (s) onto the pump body (d)
in place of the milk container.
10