Getting Started - Rowenta DOUBLE LISS SF7228U2 Mode D'emploi

C.Smoothing plates with CeramicTitaniumTourmaline coating
D.Built-in heating comb with Ceramic
E. LED temperature display: 5 heat settings + temperature lock
F . Buttons -/+ to reduce and increase temperature
G.Ionic System
H. Lock System to safely close and lock/unlock your iron.
I. Pouch

3. GETTING STARTED

1. Lock System (Fig3) : To open the clamps, pull the Lock System
back.
To lock the clamps: close the clamps and push the "Lock System"
to the front.
2. Plug in the appliance.
3. Set the ON / OFF switch to position On. (B)
4.Your appliance will heat up very quickly (ready to use in less
than 30 seconds) and the temperature will remain stable
throughout use. (Fig. 1)
5. Select the ideal temperature for your hair using the -/+ (fig.
2) buttons: press the – button to reduce the temperature or the
+ button to increase it.The red light indicates the selected
temperature.
6. After use: Place ON/OFF (B) switch in the stop position (Off),
close the clamps, use the "Lock System", unplug the appliance
and leave it to cool down completely before putting it away.
Locking the temperature:
To avoid any handling error, such as inadvertently pressing the
+/- buttons during use, this appliance is designed with a locking
function. If you want to lock your temperature setting during
use, press the + or – button for 2 seconds. A padlock will
appear on the screen to signal that your temperature setting
has been locked. If you want to change the temperature, you
will have to unlock it by again pressing the + or – button for 2
seconds. Once your setting has been unlocked, the padlock will
disappear from the screen.
4. USING YOUR STYLER
IMPORTANT: This styler works in a well-defined direction –
always use this styler with the heating comb facing down (see
Fig. 6).
The ceramic coating of the comb and the plates protects your
hair against excessive temperatures, by distributing the heat in
a uniform manner.
Get The Ultimate Pin-Straight Hair
• Your hair should be clean, dry and untangled. (see Fig. 4)