Safety Tips - Buffalo GL346 Mode D'emploi

UK

Safety Tips

• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• Ensure the location for the appliance can support its weight
when full.
• DO NOT fill the appliance above the 'MAX' level.
• DO NOT immerse the appliance in water.
• DO NOT leave the machine unattended during operation.
• DO NOT operate this appliance when less than one third full.
• DO NOT touch the outer surfaces of the appliance.
They become hot during use.
• Suitable for indoor use only.
• Always switch off and disconnect the power supply to the
appliance when not in use.
• Keep all packaging away from children. Dispose of the
packaging in accordance to the regulations of local authorities.
• If the power cord is damaged, it must be replaced by an
Buffalo agent or a recommended qualified technician in order
to avoid a hazard.
• Please ensure that the tap is screwed fully on before use.
• Buffalo recommend that this appliance should be periodically
tested (at least annually) by a Competent Person. Testing should
include, but not be limited to: Visual Inspection, Polarity Test,
Earth Continuity, Insulation Continuity and Functional Testing.
2
GL346-GL349_ML_A5_v5_20210226.indb 2 GL346-GL349_ML_A5_v5_20210226.indb 2 2021/2/26 14:37 2021/2/26 14:37