Out Of Range - Angelcare AC605-2PU Manuel Du Propriétaire

TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
Turn the Nursery Unit sensitivity dial from less
sensitive (0) to very sensitive (5).
NOTE:
If you are experiencing false alarms,
adjust the Sensitivity level.
For better result, start by half level
increases or decreases.
IMPORTANT
• The Sensor Pad is not designed for use with adults, children or infants older
than 24 months.
• Once you are finished using the Sensor Pad, please remove it from the baby's
crib and store it away.

5.2 - OUT OF RANGE

Your monitor has an Out-of-Range function that advises you when your two units
are not communicating. Out-of-Range situations can be caused by distance or by
physical interferences.
RANGE:
Open field (Open area without obstructions): up to 820 feet (250 meters).
TO ACTIVATE THIS FUNCTION:
Press and hold the Nursery Unit Night
Light button for 2 seconds.
The Out-of-Range Indicator (orange)
on both units will light up to display
function's activation.
OUT-OF-RANGE ALARM
• Alarm activates when your two units are not communicating.
• The Parent Unit will emit a double beep every 8 seconds.
IMPORTANT
If the Out-of-Range function is activated and you turn the Nursery Unit OFF
the Out-of-Range Alarm will sound. Turn the Nursery Unit ON again to reconnect both
units. To reactivate the Out-of-Range function, follow steps above. If you turn the
Parent Unit OFF, the Out-of-Range function will be deactivated but the orange light will
stay lit on the Nursery Unit. To reactivate this function on the Nursery Unit follow steps
above.
16
01mf8_Manuel_NA_AC605_12003.indd 16
All manuals and user guides at all-guides.com
2015-03-27 11:42 AM