Step 5 - Testing And Getting To Know Your Monitor - Angelcare AC605-2PU Manuel Du Propriétaire

STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR

5.1 - SENSOR PAD
TO TEST THE SENSOR PAD:
1
MOTION ALARM
• If NO movement is detected after 15 seconds you will hear a single 'TIC' pre‑alarm
sound from the Nursery Unit.
• If after a further 5 seconds there is still NO movement detected both the Parent Unit
and the Nursery Unit speakers will emit a loud warning sound.
• Green light on the Nursery Unit will turn OFF to indicate NO movement is being
detected.
IF THE ALARM DOES NOT SOUND
• Avoid contact with crib while Sensor Pad is in operation.
• Place crib near a supporting wall.
• Adjust the Sensor Pad Sensitivity level.
TO STOP THE ALARM
Place your hand
back on the
mattress.
01mf8_Manuel_NA_AC605_12003.indd 15
All manuals and user guides at all-guides.com
1) Move your hand lightly on the mattress.
2
2) Remove your hand from the mattress.
3) Repeat by moving your hand lightly in
OR
The Nursery Unit Movement
Indicator will flash continuously.
After 15 seconds you will hear a 'TIC'
pre‑alarm sound, and 5 seconds later
the Movement Alarm will trigger.
all four corners of the mattress. Ensure
the Nursery Unit Movement Indicator is
still flashing.
Shut the Nursery
Unit OFF
E
N
15
2015-03-27 11:42 AM