Speaker Components; Installing The Speakers On The Tallboy Stand - Samsung HT-E5330 Mode D'emploi

Connections

Speaker Components

STAND BASE
(L) (R)
FRONT

Installing the Speakers on the Tallboy Stand

1. Turn the Stand Base upside-down and
connect it to the Stand.
2. Use the driver to combine the screws (5x20)
on the 3 marked holes.
3. Straighten a supplied speaker wire and put in
the hole on the center of Stand Base.
4. Connect the upper Speaker to the assembled
Stand.
5. Insert a screw (5x15) clockwise into the hole
on the rear of the speaker using a screwdriver.
And then connect a speaker cable.
6. This is the appearance after the speaker is
installed.
Follow this steps to install other speaker.
16
|
English
HT-E5330_ZC_ENG_0303.indd 16 HT-E5330_ZC_ENG_0303.indd 16
All manuals and user guides at all-guides.com
SCREW (5 20): 6EA
X
(L) (R)
SURROUND
STAND
SPEAKER CABLE
CENTER
1
Stand Base
2
Stand
3
4
5 6
SCREW (5 15): 2EA
X
SUBWOOFER
Speaker
Stand
2012-03-03 오전 10:12:31 2012-03-03 오전 10:12:31