Publicité
2. Pairing with Bluetooth device
Pair this unit with the Bluetooth device you want to connect.
1. Activate Bluetooth function of the Bluetooth device to be connected.
2. With the power off, press and hold this unit's
3. Select the "DENON AH-GC30" appears on the Bluetooth device to be connected.
• If you are requested to enter a PIN code (pass key), enter "0000" (four zeros).
3. Playback music
Playback operations can be performed from both the Bluetooth device and this unit. Here
we will explain the operations using the control buttons on this unit.
Play/Pause
Next track
Previous
track
4. Noise Cancelling function
When the NC button is pressed and held for 2 seconds or more, the NC LED blinks and
the ambient noise cancel function turns on. Press the NC button to cycle between 3
modes: Airplane / City / Office and choose your preferred setting.
Web Manual
Refer to the web manual for other functions information and
operation procedure details, such as remaining battery indication,
audio guidance, and so on.
Enter the following URL into your web browser:
manuals.denon.com/AHGC30/ALL/EN/
AH-GC30EM_QSG_181203.indd
After the Bluetooth LED lights, it blinks in approximately 1 second intervals and this
unit enters pairing mode.
When connected, the Bluetooth LED on this unit lights for approximately 2.5 seconds.
Press the 1 / 3 button once.
Press the 1 / 3 button twice.
Press the 1 / 3 button three
times.
2
button for 4 seconds or more.
1/3
Increase volume
Press the volume "+" button.
Decrease volume Press the volume "-" button.
2
2018/12/04
16:29:25
Publicité
