Audio Settings - Panasonic TY-SB01QS Mode D'emploi

Audio settings

By installing this product in a compatible display and
setting the display's input to [SLOT], audio setting can
be made.
Note
●
Some displays are not supported.
The setting can be made on [Sound] for the main unit
menu.
■
[Group select]
Select the audio group multiplexed to the SDI signal.
[Channel 1-8]:
Selects channel 1 to channel 8.
[Channel 9-16]:
Selects channel 9 to channel 16.
■
[Left channel]
Select the channel of SDI audio to be output to the
left channel.
When [Channel 1-8] is selected for [Group select],
the channel can be selected from 1 to 8.
When [Channel 9-16] is selected for [Group select],
the channel can be selected from 9 to 16.
■
[Right channel]
Select the channel of SDI audio to be output to the
right channel.
When [Channel 1-8] is selected for [Group select],
the channel can be selected from 1 to 8.
When [Channel 9-16] is selected for [Group select],
the channel can be selected from 9 to 16.
Note
● Only the SDI 1 IN terminal and SDI OUT terminal of
this product support the following audio signals.
12G-SDI: 48 kHz, video synchronization, 16 CH
•
compatible
3G-SDI: 48 kHz, video synchronization, 16 CH
•
compatible
HD-SDI: 48 kHz, video synchronization, 8 CH
•
compatible
● Audio is not output if audio channels to which audio
are not multiplexed.
7
English