Before First Use; Cleaning The Soleplate - Black & Decker X750R Mode D'emploi

• Steam may escape from the soleplate.
• Surfaces may be hot during use and during
the cooldown period.
• Set the temperature control dial to the min
position before plugging in or out.
• Let the appliance cool down before leaving it
unattended and before cleaning or inspecting
any parts of the appliance.
• The power supply cord should not touch the
hot soleplate during use or during the cool
down period.
• Do not touch the soleplate until it has cooled
down.
• Wait until the appliance has cooled down
before emptying the water tank as the water
may still be hot.
• Always diconnect the appliance from the
supply before filling, emptying, cleaning, or
carying out any maintenance on the
appliance.
• The iron must be used and rested on a
stable surface
• The iron is not to be used if it has been
dropped, if there are visible signs of damage
or if it is leaking
Before first use

Cleaning the soleplate

• Make sure that the appliance is unplugged.
• Fill the appliance with water as described
below.
All manuals and user guides at all-guides.com
• Use the self-clean system as described
Some parts of the appliance have been lightly
greased and as a result the appliance may
smoke slightly when switched on for the first
time. This will cease after a short while.
Assembly
Warning! Before assembly, make sure that the
appliance is switched off and unplugged.
Filling the water tank (Fig. B)
In order to be able to use the steam function or
the spray feature, you will first need to fill the
water tank with water.
• Make sure that the appliance is unplugged.
• Open the water tank cover (12).
• Hold the appliance at an angle as shown.
• Fill the appliance with water using the beaker
• Close the water tank cover.
Warning! Never fill above the maximum filling
level (9). Normal tap water can be used, but if
you live in a hard water area the use of distilled
water is recommended.
• Do not use chemically descaled water.
Use
Warning! Do not leave the appliance
unattended while it is connected to the power
supply and during the cool down period.
below. When finished, wipe the soleplate and
steam vents with a cloth.
provided.
ENGLISH
5