How To Use - Black & Decker First Impressions ICR500 Mode D'emploi

Fer avec enrouleur de cordon
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Product may vary slightly from what is illustrated.
1. Spray nozzle
2. Water-fill cover
3. Fabric-select dial
4. Spray button
5. Steam button
6. On/auto off indicator light
7. Comfort Grip ™ handle
8. Cord reel button
9. Anti-slip rubberized heel
10. Fabric guide
11. Water tank
®
12. AUTO CLEAN
button
13. Soleplate
14. Button groove
3
Symbols
Surge of steam
Spray
Anti-Drip System

How to Use

This appliance is intended for household use only.
GETTING STARTED
Remove any labels, stickers or tags attached to the body or soleplate of the iron.
Note: Use ordinary tap water for ironing. Do not use water processed through a home
softening system.
Important: For optimum performance, let the iron stand for 90 seconds before beginning to
iron.
Tip: If unsure of a garment's fiber, test a small area (on an inside seam or hem) before roning.
FILLING WATER TANK
1. Open the water-fill cover (A).
A
2. Tilt the iron and using a clean measuring cup, pour water into
opening until the water reaches the MAX level mark on the water
tank (B). Do not overfill.
3. Close the water-fill cover.
B
4. Plug in the iron. The power indicator light illuminates and stays on
during the ironing cycle (C).
Note: If you need to add water while ironing, unplug the iron and
follow above steps.
SPECIAL FEATURES
C
Automatic Shutoff in 3 Positions
• Your iron will automatically turn off after 30 seconds of inactivity if
left on its soleplate or on its side. If left vertically on its heel rest, it
will turn off after 8 minutes (D).
30 seconds
• The unit beeps five times and the auto shutoff indicator light blinks
to let you know the iron has shut off.
8 minutes
• Once you pick up the iron, an internal motion-sensitive detector is
D
activated and the iron starts heating again.
Note: Wait for iron to reheat completely before resuming operation.
Anti-Drip System
The anti-drip system prevents water spotting at low temperatures.
IRONING WITH STEAM
Smart Steam™ Technology
The Smart Steam™ system automatically generates the right amount of steam for the fabric
type selected. Once you select the temperature, the Smart Steam™ technology detects the set
temperature and adjusts the steam power accordingly.
4

Publicité

Table des Matières
loading

Table des Matières