Connections - Telefunken TFL505070B Mode D'emploi

Getting started

Connections

Connector Type
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
PC/YPbPr
Audio
Connection
(side)
HDMI
Connection
(back)
SPDIFF
(Coaxial Out)
Connection
(back)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
HEADPHONE
Headphone
Connection
(side)
YPbPr Video
Connection
PC to YPbPr
(side)
USB
Connection
(side)
CI
Connection
(side)
LAN
Connection
Ethernet
(back)
Cables
Side Audio/Video
Connection Cable PC Audio Cable
(Supplied) (Not supplied)
AV Connection Cable
(supplied)
YPbPr Connection
Cable(not supplied)
Câble LAN / Ethernet
English - 36 -
Device
Y o u m a y u s e a V G A -
compatible YPbPr cable (not
provided) to enable the YPbPr
signal via the VGA port. |You
will no longer be able to use the
VGA and YPbPr simultaneously.
| For the YPBR or PC port, you
have to connect the audio
output of your device to the
television's audio AV input.
|When an external device is
connected to the jack socket
of your TV, the TV will enter
AV mode automatically when
you turn on the external device
.|When you are in digital mode
(tuner, usb, hdmi) you will not
have audio-video signal output
through the jack socket. |If you
use a wall-mounted kit,un , it is
advisable to connect all your
cables before fixing your TV
to the kit. |Insert or delete the
CI module CI only when the
television is off. Consult the
module's instruction manual
f o r m o r e i n f o r m a t i o n o n i t s
settings. | Each USB input of your
TV supports devices up to 500mA.
Connecting devices that have
current value above 500mA may
damage your TV. By connecting
an HDMI cable to your Sharp
LCD TV, you have to use only a
shielded HDMI cable to guarantee
a sufficient immunity against
parasitic frequency radiation.
device are turned off before making
any connection. After the connection
is done, you can turn on the units
and use them.
If you want to connect a
device to the TV, make sure
that both the TV and the