SOUNDMASTER NR-980CD Manuel D'instructions page 7

Repeat playback
1. To select single track repeat function, choose the track you want to repeat, then press
PLAY/PAUSE (16) to play the track. Press REPEAT (12) once, to activate the single track
repeat and the repeat indicator (11) will flash.
2. To select all tracks repeat function, press PLAY/PAUSE to start, then press REPEAT (12)
twice to activate all track repeat function. Repeat indicator (11) will remain on.
3. To erase the repeat function, press again REPEAT (12) until the repeat indicator (11) is off
or release the CD-player arm.
Programmable playback (max. 16 tracks)
1. Press PROGRAMM (18). "Pr" will shown in LED-display and programme indicator will flash
2. Press FORWARD SKIP (13) or BACKWARD SKIP (14) to select track.
3. Press PROGRAMM (18) to instore the selected track.
4. Repeat steps 2 and 3 to program other tracks.
5. Press PLAY/PAUSE (16) to start programmable playback.
6. To erase the programmable sequence, press STOP (17) twice until program indicator (19)
is off.
Loudness
Regjust the loudness knob (7) to rotary your desired music style.
Headphone
Connect a headphone with 3,5mm plug on headphone jack (4). Speaker will automatically turn
off.
Line out
You can connect the radio to your home music-center by connecting cinch cables on jacks (20)
Specifications
Frequency range FM
AM
Speaker
Powerconsumption
Power source
Design and specifications can be changed without any further notice.
Copyrights by Woerlein GmbH, D-90556 Cadolzburg, Germany
All manuals and user guides at all-guides.com
GB-2
87,5 – 108MHz
540 – 1600 KHz
5" 4ohm
30 Watt
230V 50Hz