Technical Data - Worx WG184E Notice Originale

1. HANDLE ADJUSTMENT KNOB
2. AUXILIARY HANDLE
3. UPPER SHAFT ROTATION BUTTON
4. COMMAND FEED BUTTON
5. BATTERY INDICATOR LIGHT
6. BATTERY PACK *
7. ON/OFF SWITCH
8. LOCK OFF SWITCH
9. UPPER SHAFT
10. LOCKING COLLAR
11. LOWER SHAFT
12. WHEEL STORAGE POSITION
13. SAFETY GUARD
14. LINE CUTTER
15. EDGER WHEELS
16. LINE FEED BUTTON
17. SPOOL CAP (SEE FIG. N)
18. SPOOL (SEE FIG. N)
* Not all the accessories illustrated or de-
scribed are included in standard delivery.

TECHNICAL DATA

Voltage 40V MAX (2x20V MAX) *
Cutting Diameter
Line Diameter
Battery type
Lithium-ion
Battery Model WA3551 (2.0Ah)
Charger Model
Charger rating
Input: 100-240V~50-
Output 1: 20V
Output 1: 20V
Charging time
(approx.)
Battery pack:
2.0Ah (1pc)
2.0Ah (2pcs)
Machine Weight
2-in-1 Grass Trimmer/Edger
All manuals and user guides at all-guides.com
WG184E WG184E.9
33cm
2mm
/
/
WA3883 /
60Hz, 100W
,
/
2.0A
**
,
2.0A
**
/
0.5 hr
1 hr
3.9kg 3.1kg
*Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
** Charger output 1 and output 2 mean two ports
with the same output voltage and current.
ACCESSORIES
Battery pack (WA3551)
Charger (WA3883)
Spool (WA0014)
Safety guard
Edger wheels
We recommend that you purchase your accessories
listed in the above list from the same store that
sold you the lawn trimmer. Refer to the accessory
packaging for further details. Store personnel can
assist you and offer advice.
NOISE DATA
A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection
VIBRATION INFORMATION
Typical weighted vibration
Uncertainty
The declared vibration total value may be used for
comparing one tool with another, and may also be used in
a preliminary assessment of exposure.
WARNING! The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring
it is sharp and in good condition.
WG184E WG184E.9
2 /
1 /
1 1
1 1
1 1
L = 78 dB(A)
pA
3 dB(A)
L = 95.4 dB(A)
wA
3 dB(A)
ah < 4 m/s2
K = 1.5 m/s²
EN
11