Assembly - Bissell 2253 Serie Guide De L'utilisateur

Assembly

The only tool you will need to assemble your vacuum is a
Phillips-head screwdriver.
1
Place the
Upper Handle
onto the base
and push it
down. Then
attach the
handle with
the 2 screws
taped to the
handle in a
plastic bag.
4
Wrap hose up and around
the Hose Wrap on the
handle. Slide end of hose
into vacuum base.
7
Now, put your accessory tools on the vacuum and you're ready to go!
Pet Hair Corner Tool
NOTE: Flexible Pet Crevice Tool & Pet Hair Fabric Tool do not store on board.
Febreze and Febreze logo is a registered trademark of The Procter & Gamble Company,
Cincinnati, Ohio used under license by BISSELL Homecare, Inc.
All manuals and user guides at all-guides.com
2
Insert the Extension Wand
base and turn it to the right
to lock in place.
5
To install the optional
Febreze® Filter, press the
tank release button and
pull tank from vacuum. Lift
tab to access and remove
foam filter from lid.
Pet TurboEraser® Tool
3
Insert the Stretch Hose
end into the back of the
vacuum and twist right to
lock in place.
6
Replace Foam Filter with
Febreze® Filter. Close tank
lid. Place tank back on
vacuum and press firmly
until you hear a "click."
Extension Wand
www.BISSELL.com
click
5