Assembly - Bissell MULTIREACH ION XL 1971 Serie Mode D'emploi

Charging
WARNING
Do not plug in your MultiReach™ Ion XL until you are familiar with all instructions
and operating procedures.
1
click
Insert foot into body
of the vacuum until
you hear a click.
Control Buttons
NOTE: The brush roll will be ON when the stick vacuum is turned ON. Having the
brush roll ON may improve cleaning on soft surfaces such as low-pile area rugs.
LED Display
Battery Status LED Color
100% Blue
66-99% Blue
33-65% Blue
1-32% Blue
0% Red
2
Plug the charging
cord in to the port on
the underside of the
charging base and plug
the cord in to the wall.
Power Icon = On/Off
Suction Icon = Suction Control
Brush Icon = Brush Roll On/Off
EdgeReach = Edge Cleaning On/Off
LED Light Codes
3 solid lights for 10 minutes, then flashes once per minute
2 lights on, 1 light blinking
1 light on, 1 light blinking
1 light blinking
1 light blinking quickly
3
Place the vacuum on the
charging base. Make sure
the LED lights are lit up
to ensure it is connected
properly.
www.BISSELL.com
5