Computer Functions; Immediate-Start Function; Exercise With User Setting; User Selection And Setting Of Personal Datas - Finnlo ELLYPSIS SX 1 Mode D'emploi

5.3 Computer Functions

5.3.1 Immediate-Start function

In order to provide optimum user friendliness of your training equipment, an opportunity for quick and uncomplicated initiation of training
was devised. Please do the following :
• Connect the power supply included in the scope of delivery to the bottom end of the equipment, at the socket provided. A test image will
briefly appear on the computer. After a short time „U0, U1, U2, U3 or U4" will appear in the center of the digital display.
• Start your exercise by pedalling. You have activated the last used, all values start counting up. After you have finished your exercise, the
reached values will not be safed in the, if you have selected U0!

5.4. Exercise with User setting

5.4.1 User selection and setting of personal datas.

1) USER-Selection
A)
The already set data will start counting
backwards. If the set data reach 0, the computer
will stop and a beep will be heard. If you didn´t
set any values, all data will start counting up.
All manuals and user guides at all-guides.com
→
→
or
→
→
The selected User (U0-U4) will
be shown in the display.
B)
3s< press: check 2) Setting of personal
<1s press: check 5.4.4) MANUAL Mode
28
→
datas