modbar New Steam System Mode D'emploi page 7

accessories are included:
• 3 stainless steel braided
hoses for water connections;
• 5 mt of reinforced plastic
tubing for drainage;
• 9 hose clamp.
23) If the machine
been temporarily
in settings with a room
temperature of less 0°C/32°F,
the machine must be placed
in a warmer environment in
order to gradually defrost the
hydraulic system prior to use.
24) Water pressure supply
must be between 0,2 and
0,6 MPa.
The maximum inlet water
pressure shall be at least
1,0 MPa (Denmark, Norway,
Sweden, Finland).
25) The machine is intended
to be permanently connected
to fixed wiring, and it is
mandatory that a residual
current device (RCD) with
a rated residual operating
current not exceeding 30mA
is installed.
has 26) This machine is designed
housed only for preparing coffee and
hot drinks.
27) Any modification to the
equipment
the manufacturer
be held liable for damage
to property, animals, and/
or persons if the equipment
undergoes
and aesthetic
changes
and characteristics, and in
general is tampered with in
one or more of its constituent
components.
28) Dimensions and weights common to all
is prohibited;
cannot
technical
changes,
in performance
machines
D
E
F
C
A
A [mm] 356 D [mm]
B [mm] 215 E [mm]
C [mm] F [mm]
406
18
[kg] [kg]
WEIGHT WEIGHT
Module Tap
B
334
89
312
3,5
7