Akrapovic Slip-On Line Instructions D'installation page 7

2. Carefully slide the mufler with link pipe onto the outlet side of the stock pre-mufler. Rotate the link pipe inside the
mufler's inlet, until the mufler aligns correctly oin respect to the motorcycle. Tighten the mufler's bracket bolt and
clamps to the speciied torques (F 03).
CAUTION: be careful not to damage the exhaust or any other part of the motorcycle during this procedure!
7 / 10
22Nm
16ftlb
14Nm
10ftlb
9.8Nm
7 ftlb
F 03