Parts List - Akrapovic Slip-On Line Instructions D'installation

PARTS LIST

The following parts should be found in the box:
• Installation Manual
Complete/Partial exhaust system / Slip-ON line oz.Evolution line oz. Racing line / EC Type approval
• Homologation certiicate/ compliance documents if applicable
ZNAMKA MODEL 1
• Fitting material
ZNAMKA MODEL 2
ZNAMKA MODEL 3
• Mufler and/or pipes
...
• Parts depicted on schematic view
MUFFLER REPAIR KITS
REPACK
REMOVAL OF STOCK EXHAUST SYSTEM:
SLEEVE
The process of uninstalling the original exhaust system may vary depending on the existing exhaust system.
Please follow the original exhaust system manufacturer's instructions for uninstalling the original exhaust system.
If you for any reason decide otherwise, please note that any information provided in this respect herein should
be considered as general information provided for your convenience only.
In case your Akrapovič exhaust system may not be used on certain roads or under certain conditions,
please keep the stock or other exhaust system that you can use in such circumstances legally.
5 / 10
Tools & equipment
•
T-handle 8 mm wrench
•
T-handle 12 mm wrench
• T-handle Torx 45 wrench
•
Combination 13 mm wrench
• T-handle 6 mm hexagon wrench
OPIS
Instalation Drawing
4
3
Označevanje po velikostnih sklopih navzgor
- najprej označi celotni sistem z 1-ko
- označi tail-pipe sete
- označi opcijske sisteme
- označi sete oz. posamezne komponente
po logični velikosti (dušilec, kapa, HE, CO, L
SAP KODA Revizija / Iteracija
X / A.1
HU VIT 701
REVISION DATE OF REVISION:
X
4. nivo: posamezni sestavni deli
ISO, pisava 2
3. nivo: manjši sklopi rezervnih delov
ISO, obkrozitev 0.0, pisava 2
2
2. nivo: podsestavi, sklop
ISO, obkrozitev 0.3, pisav
1
1. nivo: sistem v ce
ISO, obkrozitev 0.4